we went to the dunes this weekend and i noticed that the gang wasn't right behind me so i turn around, and get back to find everyone parked around the 80 well i go up and the thing fires right up but then it would just start to die, but if you push off then on the trottle it would catch again, well i think what happened is my daughter was riding hard thru the whoops and the float level must of got out of adjustment. my question is is there a easy way to get that carb off everything on that thing is small and hard to get to.

 

The float level is fine (besides there is no float level adjustment). It sucked a piece of sand in.
To remove the carb I have a 8mm snap-on wrench. Only one small and strong enough to loosen the carb bolts.
FYI: I lay on the seat and put my arms down to the carb.
hint: silicone that o-ring in that plastic piece. [img]i/expressions/face-icon-small-wink.gif[/img]

 

thanks i thought that might be the case hope it wasn't that much sand[img]i/expressions/face-icon-small-sad.gif[/img]

 

It's usually only one speck,just slightly bigger than the jet size [img]i/expressions/face-icon-small-happy.gif[/img]

 

so i go to take the carb off and notice that there is a second line from the petcock that i must not have hooked back up, what is that line for. well i got the carb off and cleaned it good glad to report all seems well again. thanks for the help Lt80. you must be a very patienant man those thing are very small to work on and that made it hard for me.