KTM Discussions about KTM ATVs.

Picked Up a Speed today.

Thread Tools
 
Search this Thread
 
Old Jan 13, 2002 | 01:52 PM
  #11  
cddcpa's Avatar
Trailblazer
Joined: Sep 2000
Posts: 56
Likes: 0
Default

evhwg,
Any Cannondale quad can be remapped to any other Cannondale map.
BUT, it changes all other information along with the rev limit. Owners, please do not remap stock exhaust Cannibals and Speeds with a Blaze or Moto map, air/fuel ratios, timing, etc will be changed and can damage the engine by being to lean. And if the exhaust is changed, please request the proper mapping to go with the system from the silencer manufaturer to ensure they have dynoed the system and created a map for their system for proper air/fuel ratio.

Dealers and owners can load maps with the Optimum software but care should be taken to choose the correct map for the particular setup. It is easy to do properly, but it is not as easy as loading a Moto map into a completely stock Cannibal. Damage will result.


Cdaleracer,
Cannondale is not currently shipping any quad with a braided rear brake line. No plans to do so have been announced yet.

SparkyEX,
The Cannibals being shipped during the last four to five weeks are with the hydraulic clutch. Every Cannondale product being shipped since has the hyd clutch as they have changed to the SSM engine cases for it and they will not use the old cases anymore. Not any problems with the old ones, just a change to the hyd clutch system on the right side of the case.

The best bargain there is right now is to find a recent shipped Cannibal with Ohlins, hyd clutch, and all the Speed goods except for the bars, and 11,600 rev limit (which is easy to change), all for a $1,000 less.
 
Reply
Old Jan 13, 2002 | 02:05 PM
  #12  
CornDog's Avatar
Pro Rider
Joined: Sep 2001
Posts: 554
Likes: 0
Default

i heard the cdale has a hydrolic clutch...
 
Reply
Old Jan 13, 2002 | 02:05 PM
  #13  
CornDog's Avatar
Pro Rider
Joined: Sep 2001
Posts: 554
Likes: 0
Default



<< i heard the cdale has a hydrolic clutch... >>



sorry i mean cannibal
 
Reply
Old Jan 13, 2002 | 02:22 PM
  #14  
JayBR's Avatar
Thread Starter
|
Pro Rider
Joined: Mar 2000
Posts: 522
Likes: 0
Default

The dealer where I got the speed had a cannibal with Ohlins and ITP's but not a hydraulic clutch. If it had the clutch I probably would have gotten that instead of the speed, the only other difference I saw was the silencer and bars.
 
Reply
Old Jan 13, 2002 | 06:05 PM
  #15  
ltracerx's Avatar
Pro Rider
Joined: Apr 2001
Posts: 1,629
Likes: 0
Default



<< &lt;&lt; i heard the cdale has a hydrolic clutch... &gt;&gt; >>



LOL, if you own a Cannibal, shouldn't you KNOW this???? HMMMMM......
 
Reply
Old Jan 13, 2002 | 09:19 PM
  #16  
CdaleRacer's Avatar
Pro Rider
Joined: Jul 2001
Posts: 268
Likes: 0
Default

No braided rear line yet Ryanstones. I'm going to get one before the racing season starts for sure, I think it will have a much better feel and also the $ isnt bad at all.
 
Reply
Old Jan 13, 2002 | 10:23 PM
  #17  
YoDaddy's Avatar
Pro Rider
Joined: Nov 2001
Posts: 1,221
Likes: 0
Default

Mine has the hydraulic clutch. Very smooth feel to it too. I'm thinkin about rear steel braided lines too but I have to buy nerfs, 18&quot; tamers, and order new front wheels first. If I have the extra cash I'll get the steel lines though. I'm gonna save up the $$$ for extended a-arms and a wider axle too because the dale is pretty dang tippy. Maybe I should just get the extended a-arms and buy wheel spacers for the rear, I have a part time minimum wage job and over half of it goes to payments on my quad.
 
Reply
Old Jan 13, 2002 | 10:41 PM
  #18  
JayBR's Avatar
Thread Starter
|
Pro Rider
Joined: Mar 2000
Posts: 522
Likes: 0
Default



<< Congratulations. If I were buying a Cdale the Speed is what I would get. I think it is worth it to get the better rims and shocks, and the better fuel injection mapping. Do you have any pics of it? >>



Just one picture so far of my son sitting on it dreaming of the day I let him ride it.

My new Speed
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
mtdewmn
Polaris
16
Jan 19, 2017 12:13 PM
Ramman1
Kids Quads
5
Jun 16, 2016 09:07 PM
AlotL1keVegas
Kids Quads
1
Aug 18, 2015 09:38 PM
Anomers
Polaris
2
Aug 16, 2015 11:06 AM
95wolv
CAN-AM (BRP)
1
Jul 17, 2015 08:13 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 08:14 AM.