Hey im getting 18 inch razrs on my blaster for the back and was wondering how i should gear it to get back close to the stock gearing, just not to lose any acceleration from what stock is? I think that a 14 tooth in the front, and a 36 in the back will (stock 13:40) work but im not sure. What do you all think?

 

You should only need a 14 in front and possibly one tooth smaller in the rear. but, going to a 36 in the rear without changing the front sprocket will also work, but do not do both


Thanx, BJ

 

all you need to do is get a 14 tooth for the front. i have 18's on my blaster and it did the trick for me. if you go up one tooth size in the front AND go down a tooth size in the back you will loose to much bottom end. do only one or the other.

ALSO do not buy the brand "Primary Drive" sprockets. they do not fit on blasters. i know i learned that the hard way.