Hello everyone.
This is my first post on the forum so I will introduce first.

My name is Mark and I'm relatively new to ATV world. I bought my first ATV a year ago and really enjoy it. Like every other things I own with gazoline engines, I just cant stop modifying to increase power [img]i/expressions/face-icon-small-smile.gif[/img]
Last summer, I ran with the 70cc with my friends but at the end of the summer I decided it needed more power. First, I swaped the 70cc for a 110cc which gave me an edge over my buddys still on 70cc and it was an easy bolt-on swap. After a summer of fun with the 110cc (they want a 110cc now) so I want to up the power again to stay ahead [img]i/expressions/face-icon-small-smile.gif[/img] but there is no bolt-on swap for bigger engine with automaic or semi-automatic transmission so I started researching on the web.. and by random clicking on stuff, I found the ATVConnection forum!!!
I keept reading on many topics on the forum for about a couple of weeks before finaly registering and I can see by the conversations you guys are having that your are passionate about ATVs, just like me since I bought my lil quad [img]i/expressions/face-icon-small-smile.gif[/img] So here is the project that made me discover the forum and that I want to share with you guys :

ATC 200M engine in 70cc mini chinese ATV.
I remember that when I was around 12 years old, my father had a 250cc "Big Red" It was a lot of fun back then and very reliable too since never had to repair anything on it plus it was semi-automatic, exactly what i'm looking for! So I'm in the process of buying a ATC200m engine, 4 stroke, electric starter, semi-auto trans and chain drive to put in my mini quad [img]i/expressions/face-icon-small-smile.gif[/img] I heard It's around 15 hp.. my 70cc was 4.1hp, 110cc is 6hp so it's a good upgrade I guess. But since I know a 200m engine will require frame modifications, I already started to look at the future to do it all at onece [img]i/expressions/face-icon-small-smile.gif[/img] I found out stroker crank, high compression pistons, cylinder sleeves, cams, big valves that can bring the thing over 20hp. An area I did not find much infos about is if it's possible to hook a 350x cylinder to the 200m cranckcase, I will inquire on that soon and if not enough, a mitsubishi TD-02 turbocharger haha

I will post some pics of the various steps//stages of the modification as I progress [img]i/expressions/face-icon-small-smile.gif[/img]

Comments and ideas are welcomed!!

Mark

 

Stock x 500% with the stroker, etc. [img]i/expressions/face-icon-small-happy.gif[/img] That's the biggest upgade in ATV power I've ever heard of. It's like putting a jet engine in a car. I sure hope it works. That will be the fastest little thing around for sure.

 

yeah I will have to get a better helmet than a straw cowboy hat [img]i/expressions/face-icon-small-smile.gif[/img]
engine should be in my shop in about a week, I'll post pictures soon.

 

Just received the engine. It's not what I ordered, it's a 356cc, 2 cylinder engine with manual clutch... Here are some photos of the 4 wheeler, the 356cc and the original engine.

Quad:
http://membre.oricom.ca/sticke...gnal/4wheeler/001.jpg

http://membre.oricom.ca/sticke...gnal/4wheeler/002.jpg

http://membre.oricom.ca/sticke...gnal/4wheeler/003.jpg

http://membre.oricom.ca/sticke...gnal/4wheeler/004.jpg

http://membre.oricom.ca/sticke...gnal/4wheeler/005.jpg

http://membre.oricom.ca/sticke...gnal/4wheeler/006.jpg


356cc and original 73cc engines:
http://membre.oricom.ca/sticke...gnal/4wheeler/007.jpg

http://membre.oricom.ca/sticke...gnal/4wheeler/008.jpg

http://membre.oricom.ca/sticke...gnal/4wheeler/009.jpg

http://membre.oricom.ca/sticke...gnal/4wheeler/010.jpg

http://membre.oricom.ca/sticke...gnal/4wheeler/011.jpg

http://membre.oricom.ca/sticke...gnal/4wheeler/012.jpg

http://membre.oricom.ca/sticke...gnal/4wheeler/013.jpg


Still awaithing the 192cc mono cylinder engine. I will post more photos as I receive it.

 

The 73cc is a little bigger than the engine in my chainsaw. I can't wait to see how the ATV does with a bigger engine. And a paint job. [img]i/expressions/face-icon-small-happy.gif[/img]

 

Hey guys,
a quick update. The project aint dead. In fact, after the shop sent my engine at the wrong adress 2 TIMES! I finaly got my engine and started working. Just got the engine cleaned and the quad striped down and cutted the top tubes. Here are some pics! [img]i/expressions/face-icon-small-smile.gif[/img]

http://membre.oricom.ca/sticke...wheeler/014.jpg
http://membre.oricom.ca/sticke...wheeler/015.jpg
http://membre.oricom.ca/sticke...wheeler/016.jpg
http://membre.oricom.ca/sticke...wheeler/017.jpg
http://membre.oricom.ca/sticke...wheeler/018.jpg
http://membre.oricom.ca/sticke...wheeler/019.jpg
http://membre.oricom.ca/sticke...wheeler/020.jpg

A lot of parts will arrive during the month, more pictures soon!

Oh, you might want to have a look at http://www.powroll.com/ they have a lot of good performance parts for many different models.

Mark

 

that is cool, very cool, I hope to see a video and pics of the finished quad

 

It is really good, I really love it and let me send a thousand of thanks to this forums.
once again, thanks indeed

 

I think that's really cool and have you finished