400EX swingarm on 250R
#1
I have an '86 310R and was wondering if the 400EX swingarm could bolt up to it? I notice that it looks close in the front with the spilt mount to the frame but how abou the rear axle carrier width? I want to shed weight as well as shorten the swingarm for better hook. Any help would be great. Thanks,
CT250R
CT250R
#4
Hey CT,
A 400ex and 250r bearing carrier are interchangeable. You'd very supprised how much is interchangeable. As from the swingarm, the 400 arm doesn't go completely across. Part of the pivot rod passes through the motor, so you'd have to make somesort of aluiminum spacer. I'm not sure have much different the width is at the mounting points. Hope this helps.
Mr_400eX
A 400ex and 250r bearing carrier are interchangeable. You'd very supprised how much is interchangeable. As from the swingarm, the 400 arm doesn't go completely across. Part of the pivot rod passes through the motor, so you'd have to make somesort of aluiminum spacer. I'm not sure have much different the width is at the mounting points. Hope this helps.
Mr_400eX
#5
#7
Trending Topics
#9
#10