polaris srambler loose solenoid in axle hub?
#1
polaris srambler loose solenoid in axle hub?
Hey guys, great site! I have a 2000 scrambler 400 awd. The front left wheel had alot of slop even though the wheel bearing nut was tight. At closer examination the part of the front hub where the bearing races tap in is loose in the housing letting the axle move in the housing. The wheel bearings are not the problem i can move the whole solenoid end of the lower shock housing. So my question is does that need replaced or what holds it together? Thanks in advance for any help.
#2
If you have slack in the strut,probably worn cv joint allowing back and forth play. Check in and out play in the front strut from the shaft,then check the strut itself for any damage. Dirt Cheap Yamaha, Honda, Arctic Cat & Polaris OEM Parts & Accessories – Cycle Parts Warehouse http://www.cyclepartswarehouse.com/f...2000&fveh=5497
Thread
Thread Starter
Forum
Replies
Last Post
Shifts
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
14
07-13-2015 08:41 AM
Chocobamofo
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
1
07-10-2015 07:46 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)