Polaris 700 EFI
#1
Polaris 700 EFI
I am buying a 700 EFI this week. What is the biggest tires that I can install without any modifications. I am looking at installing either ITP 589's or Vampires??? Any suggestions. Also, is the 2 year extended warranty worth buying. All comments are appreciated.
Thanks,
Scott
Thanks,
Scott
#2
Polaris 700 EFI
Let us know how you like the EFI! I really like (although I don't own any) the 26" ITP 589's. They would be great for that ATV. I would recomend the extended warranty. It is one of those things where if you buy it you won't need it, but if you don't buy it you will regreat it! Good luck.
#4
Polaris 700 EFI
I have a friend with the 589's and he has liked them pretty well, if that is what your heart is set on. The 589's or Gators would be my choice if your planning on some hardcore mudding, but if you usually stick to mountain trails like me you could also consider Mudlites. With the 26's and up you get an inch&1/2 tread( I think) and they are much lighter than the other mudtires, therefor putting much less stress on your tranny. This is just a suggestion.
#6
Polaris 700 EFI
itp 589's all the way and they prob ride alot smoother on flat ground then the rest of them but im not sure.
--------------------------
1999 250 trail blazer
--------------------------
k&n filter DG exhaust for now
just to make it a lil lounder
titan 489 xts on the back
maxxis razors on the front
full skid plate,bash gaurd
rebuilt trans,D.I.D chain
pro amor belt,scott grips
the newer model tie rod ends
12 t front 36 t back sprokets
neon shifter ****, pro burner lights
stronger back caliper holder i made at a friends shop
cut front fenders with the floor boards removed
makin aluminum dimond plate ones
--------------------------
1999 250 trail blazer
--------------------------
k&n filter DG exhaust for now
just to make it a lil lounder
titan 489 xts on the back
maxxis razors on the front
full skid plate,bash gaurd
rebuilt trans,D.I.D chain
pro amor belt,scott grips
the newer model tie rod ends
12 t front 36 t back sprokets
neon shifter ****, pro burner lights
stronger back caliper holder i made at a friends shop
cut front fenders with the floor boards removed
makin aluminum dimond plate ones
#7
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)