grease zerks
#1
#2
![Default](https://atvconnection.com/forums/images/icons/icon1.gif)
i dont know if the Scrambler and TB zerks are identical, but im sure their close...i have a heck of a time trying to grease there, but i do it from the back, just reach up in, and maybe use something small like a screwdriver to push the grease gun on the fitting? I havent tryed that, but it may work. It also helps if you have somebody else there to help you.
#3
![Default](https://atvconnection.com/forums/images/icons/icon1.gif)
I had the same problem, here's the trick. If you have one of the 4 oz tube grease guns put an extension on the barrel then attach the zerk adaptor. You need one about 3 inches longer than they supply. Have someone lift the back of the bike up to open the swing arm up by grabbing the bar on the back an picking up. You can just reach the fitting over the top of the swing are, it's a pain but with the longer extension on the grease gun it easy.
If you don't have an extension hit Home Depot or Lowes for a pice of 1/4 (?) tubing, it's all the same tubing.
Good Luck
Gene
If you don't have an extension hit Home Depot or Lowes for a pice of 1/4 (?) tubing, it's all the same tubing.
Good Luck
Gene
#6
#7
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)