has anyone out there installed a heelclicker clutch kit? I was wondering if its very tough?and how does it work?Anyone have a dyno jet kit in there bike if so hows it work.

 

Bubs, looks like my question there was just about the same as yours. The dyno jet kit, who makes it. I know there are a few out there. I look at a K&N and on from i think a quadpro or something like that. I just want a little more power. I'm not real familar with who makes the best perfromance stuff of these small engines.

 

Bubs the heelclicker is suppose to work good ,Iam going to put one on my 500 ho when the warranty is finished (do a search on this sight under HEELCLICKER lots of info)dalton also makes a clutch kit that is suppose to work good , as for the dyno jet kit I am not sure you could try search on that as well,royaldistributing.com in ontario sells the heelclicker but has been backordered for awhile but might be available by now.

 

whats your top speed on your 500 trenchdigger?Mine tops out at 56,57

 

Bubs my top speed is 56 mph ,the only modification I have is a k&n air filter it didn"t seem to help much as far as the top speed goes,I had a 01 500 ho that would do over 60 on the speedo,but I have read that the old speedos aren"t as accurate as the new ones and the top speeds are about the same and the 04.5"s are a little stronger down low,I haven"t raced any older ones yet to confirm that though.I am leaving out this morning to go on a mud run we have every year around Bobcaygeon there is usually about 40 quads and a wide variety of brands and years ,we have a location on the run where we do some drag racing I will let you know the results when I get back.