bogging problems
#13
![Default](https://atvconnection.com/forums/images/icons/icon1.gif)
my 250 does that on hot days when i have been hard on it i normally just let it cool down then when it starts it seems like it wants to die and if i get on the throttle hard it will so i normally build the rpms real slow and it seams to wake the moter up and then it will run fine oh yea it only does it after i turn it off and then try and turn it back on....and only on hot days
#14
![Default](https://atvconnection.com/forums/images/icons/icon1.gif)
Before you change your carb settings, I would make sure that the carb is clean. If this problem just started happening, then I would assume thats the problem. If your jetting was fine before, then something happened to cause this problem. Make sure your fuel line and filter are free flowing, it sounds like the carb is starving for fuel.
#16
![Default](https://atvconnection.com/forums/images/icons/icon1.gif)
well i went out this morning and took it apart and my needle actually came up out of the hole....has that ever happened to anyone else?
but anyway i got it fixed and im recharging my K&N as we speak so once i get that back in i'll let u all know how it runs
i also lowered the clip one notch.
but anyway i got it fixed and im recharging my K&N as we speak so once i get that back in i'll let u all know how it runs
i also lowered the clip one notch.
#17
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)