4x4 in reverse for a scrambler..
#1
4x4 in reverse for a scrambler..
I first appoligze for my ignorance.. I just purchased a used 99 scrambler in fairly nice shape.. my question is this. While The 4 wheel drive works great in forward I notice that when I put it in revers the ABS light goes out on it.
is 4x4 not suppose to work in reverse? or is there something else that i'm suppose to do to get the 4x4 to work in reverse? thanks.
dave
is 4x4 not suppose to work in reverse? or is there something else that i'm suppose to do to get the 4x4 to work in reverse? thanks.
dave
#4
#5
#6
#7
4x4 in reverse for a scrambler..
This is how you get rid of the reverse override on the scramblers. Open up the front nose piece. There you will find a rectangle rubber female spade connector. There is 2 of them. The one you want is the one with the grey wire with an orange stripe. Unplug that wire from the connector (REVERSE OVERRIDE IS NOW GONE). Now to get it so the 4x4 works in reverse is a little more difficult but it is easy. Look at your reverse override button. The wires you want are the grey wire with a white stripe and a red wire with a white stripe. See where they come down in the nose piece. Take a little bit of the insulation off of each one. Now take a wire and splice it between both wires. Tape them up good. TADA you now have 4x4 and no revlimiter when in reverse without having to push in the button VERY HANDY. Your reverse light and the AWD still work like normal too
Trending Topics
#8
#9