Has anyone else had this problem? On my 05’ 700 EFI when I shift into low the indicator on the dash says the machine is in neutral and the awd won’t work, but the machine is definitely in low. I guess the awd won’t work because the indicator thinks the machine is in neutral. When I shift into high the dash says I’m in low and the machine is really in high. Park, reverse and neutral work fine it’s just when I shift from neutral to low it says I’m still in neutral. I see the shift linkage goes back to the transmission and there are some wires that come out of the transmission just under where the shift linkage connects to. I’m going to bring it to the dealer I was just wondering if someone else has had this problem and had an easy fix for it.

Thanks.

 

No problems here. Sounds like a simple adjustment to the linkage....

dave

 

That’s what I originally thought, but I get the right gear it’s just that the machine thinks it’s in a different gear. I’m thinking it’s some sort of electrical problem. When I take it in I’ll asked the dealer what the problem was. Hopefully I won't have to wait forever to get my machine back. Thanks for the reply Dave.

 

Hey Wally

Any update on this? What was the problem? What was the fix? I have a buddy with the same problem and hoping to find an easy, CHEAP fix.

Thanks

 

It was still under warranty so I took it to the dealer. I can't remember exactly what the problem was but the dealer said it was the third or fourth machine that they had the same problem with. I believe it was some sort of electronic thing that connects to the shift linkage. I know I wrote the down the name of the part but that was over a year ago. I'll look tonight and post if I find it.

 

Sounded like a sensor.

 

It is your gear shifter sensor. If you folow the rod to the trans. you will see a small black sensor with a few wires coming out of it.