i am pissed!!!
#15
i am pissed!!!
Originally posted by: XpLo400
actually theres only 2 bolts and vise grip dont work
Are you talking about the 4 bolts at the bottom of the float bowl?
#16
i am pissed!!!
Something like this would help
click here
or this
click here
i'm not sure what kind of tool stores you have up there but you should be able to go into a good store and something like this. Worst case you can drill the center of the bolt and use an easy-out.
Easy out type
bolt-out type
click here
or this
click here
i'm not sure what kind of tool stores you have up there but you should be able to go into a good store and something like this. Worst case you can drill the center of the bolt and use an easy-out.
Easy out type
bolt-out type
#17
#18
i am pissed!!!
I did a write up on carb Jetting on Polaris on a few other forums, and in that write up the first thing I Said to do was throw away the stock brass screws on the carb, they are worthless junk and stip easily. get some 4 mm screws from Home depot for about 15 cents and save yourself a headache in the future.
#20