Polaris Discussions about Polaris ATVs.

'01 Xplorer Mod's

Thread Tools
 
Search this Thread
 
  #1  
Old 07-04-2005, 02:08 AM
new2atv's Avatar
Pro Rider
Thread Starter
Join Date: May 2004
Posts: 261
Likes: 0
Received 0 Likes on 0 Posts
Default '01 Xplorer Mod's

I'm looking to do some reasonably priced mod's to my '01 Xplorer 400 4x4. My quad is all stock except for a K&N air filter. I'm looking for suggestions on what I can do. Better suspension. Better performance. Yada yada yada. I'm not looking to rebuild my engine and bore it out, just reasonably priced mod's to enhance the performance and enjoyment of my quad.

Thanks in advance for any recommendations you can provide.

 
  #2  
Old 07-04-2005, 02:17 AM
scramblerXrated's Avatar
Pro Rider
Join Date: May 2004
Posts: 1,018
Likes: 0
Received 0 Likes on 0 Posts
Default '01 Xplorer Mod's

well first on the list oughta be a clutch kit for sure.... possibly a silencer or pipe is high on that list too...

X
 
  #3  
Old 07-04-2005, 10:40 AM
ftwflh's Avatar
Quad Patrol
Don't let the hp numbers fool you. Its all in how you get it to the ground. Clutching clutching clutching!
Join Date: Apr 2000
Posts: 6,688
Likes: 0
Received 1 Like on 1 Post
Default '01 Xplorer Mod's

Depending on what reasonable is to you I would get either an Aaen Torquer pipe,silencer and matching clutch kit.Or go with a Dynoport system and a white polaris primary clutch spring.I ran the Aaen on my 400 Sportsman and it was hot.Got a Dynoport on my wifes Scrambler and it is a good system too.
 
  #4  
Old 07-04-2005, 06:52 PM
TrailBlazerguy250's Avatar
Extreme Pro Rider
Join Date: Jun 2003
Posts: 3,503
Likes: 0
Received 0 Likes on 0 Posts
Default '01 Xplorer Mod's

Sorry for being a little offtopic but will an Aaen Torquer pipe fit my Sportsman 500 ? If so how much are they ?
 
  #5  
Old 07-04-2005, 08:27 PM
new2atv's Avatar
Pro Rider
Thread Starter
Join Date: May 2004
Posts: 261
Likes: 0
Received 0 Likes on 0 Posts
Default '01 Xplorer Mod's

What are good websites to get the parts from? Thanks for the suggestions so far.
 
  #6  
Old 07-05-2005, 12:32 AM
ftwflh's Avatar
Quad Patrol
Don't let the hp numbers fool you. Its all in how you get it to the ground. Clutching clutching clutching!
Join Date: Apr 2000
Posts: 6,688
Likes: 0
Received 1 Like on 1 Post
Default '01 Xplorer Mod's

Originally posted by: TrailBlazerguy250
Sorry for being a little offtopic but will an Aaen Torquer pipe fit my Sportsman 500 ? If so how much are they ?
Sorry the Torquer is for 2strokes.Try you a White Bros slip on for more bottom end.
 
  #7  
Old 07-05-2005, 12:34 AM
ftwflh's Avatar
Quad Patrol
Don't let the hp numbers fool you. Its all in how you get it to the ground. Clutching clutching clutching!
Join Date: Apr 2000
Posts: 6,688
Likes: 0
Received 1 Like on 1 Post
Default '01 Xplorer Mod's

Originally posted by: new2atv
What are good websites to get the parts from? Thanks for the suggestions so far.
www.aaenperformance.com or http://www.dynoport.com/
 
  #8  
Old 07-05-2005, 01:56 PM
new2atv's Avatar
Pro Rider
Thread Starter
Join Date: May 2004
Posts: 261
Likes: 0
Received 0 Likes on 0 Posts
Default '01 Xplorer Mod's

Originally posted by: ftwflh
Depending on what reasonable is to you I would get either an Aaen Torquer pipe,silencer and matching clutch kit.Or go with a Dynoport system and a white polaris primary clutch spring.I ran the Aaen on my 400 Sportsman and it was hot.Got a Dynoport on my wifes Scrambler and it is a good system too.
If I went with Dynoport I would get the pipe with the spark arrestor silencer because I tend to ride in national forest's quite often. Is that pipe loud or about the same as stock? What kind of performance increase would I see from the white Polaris primary spring and that pipe together? I usually ride trails and around town but in the winter I plow snow as well.
 
  #9  
Old 07-05-2005, 06:05 PM
ftwflh's Avatar
Quad Patrol
Don't let the hp numbers fool you. Its all in how you get it to the ground. Clutching clutching clutching!
Join Date: Apr 2000
Posts: 6,688
Likes: 0
Received 1 Like on 1 Post
Default '01 Xplorer Mod's

I havent heard one with a sparkarrestor but the plain one is as loud as most aftermarket silencers.So I would say with it you should be a little louder than stock but not much.And the white spring would be perfect.
 
  #10  
Old 07-05-2005, 06:31 PM
new2atv's Avatar
Pro Rider
Thread Starter
Join Date: May 2004
Posts: 261
Likes: 0
Received 0 Likes on 0 Posts
Default '01 Xplorer Mod's

It looks like the primary spring and pipe are the first place I'll start with mod's. Will I need to rejet after adding a new pipe; more specifically the Dynoport one? Any suggestions on suspension for a better ride? I have stock tires right now but I plan on getting new tires and wheels.

Thanks for the help.
 


Quick Reply: '01 Xplorer Mod's



All times are GMT -5. The time now is 10:56 PM.