7MM STOKER 400 ????
#1
08-03-2005 | 11:54 AM
Thread Starter
|
Pro Rider
Joined: Jul 2002
Posts: 783
Likes: 0
From: Bricktucky NJ
#4
08-03-2005 | 03:10 PM
Pro Rider
Joined: Nov 2001
Posts: 1,603
Likes: 0
7MM STOKER 400 ????
Here ya go.602-696-5875.
This mod can be done a couple different way's.I think Dennis gets 3.5 mm from moving the pin on the crank,then the other 3.5 mm is made up from using a different piston.Or it can be done with the 3.5 mm on the crank and then using a spacer plate at the bottom of the cylinder for the other 3.5 mm.Crankworks in Arizona does the cranks.Hope this helps.
This mod can be done a couple different way's.I think Dennis gets 3.5 mm from moving the pin on the crank,then the other 3.5 mm is made up from using a different piston.Or it can be done with the 3.5 mm on the crank and then using a spacer plate at the bottom of the cylinder for the other 3.5 mm.Crankworks in Arizona does the cranks.Hope this helps.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)