Back again. Not doubting you but from looking on itp's website the type 5 c-series only comes in 12x7. Hopefully it is just outdated or something. If you have any further word on this please let me know.
Thanks.

 

They wont be type 5 just the regular 10 inch c-series in polished , machined or black.
The 4 spoke style.

Jim

 

So I would not have the same style front and rear rims??

 

I thought this was the type five.
http://www.denniskirk.com/jsp/produc...eafCatId=10801

thats the 12x7

http://www.denniskirk.com/jsp/produc...eafCatId=10801

10x8

back spacing will be the key to having this look good however I am not seeing a 4/4 bolt pattern listed for the scrambler on 4/156 and I beleive the O4 uses 4/4 in the rear(not positive)

here is 4x4 http://www.rockymountainatv.com/tire...sp#wheelAnchor

 

Thanks for the info man. I'll be checking into all of it in a little while.

 

http://droll.cc/boots/scrambler/done.jpg


those are series 5 itp wheels. the rears look different cause the rear bolt pattern is 4x4

 

greenlant, Those are 12x7 wheels right?? Also, what size tires frnt/rear? Good lookin bike man!

 

they are 12x7. i do a lot of mud/backwoods riding, and the stockers just werent enough. i put on 25 holeshot atrs and love them. can still do donuts, wheelies, and the 4x4 still works fine. i didnt change any clutch springs or sprockets. i am looking into changing the sprocket, just for a touch of more low end.

 

thanks for the reply. That's the info I needed!
--Tom.