Well guys I have searched and searched...can't find anyone who has detailed instructions on mounting the radiator to the top of the rack on my SP600...if by any chance someone has these instructions/pictures to an easier way to do it let me know...if not i will be doing it myself and will be taking pictures and writing it all down so i can convey the knowledge on...but of course with any do it yourself project like this i will run into problems...if you have done it and ran into these problems i would appreciate it if you could let me know so i can plan accordingly...well wish me luck and thanks for any advice you can give me...

 

Good luck... Heard lots about it ..........but never seen one done yet!!!!!Keep us posted ..My 450 plugged up on our third trip out...

 

Go to WWW.HIGHLIFTER.COM a bunch of guys have done that over there.

 

Well me and my budy have succesfully completed it on his 02 Grizz and it works great but mine is going to be completely different...the mounts on the radiator look movable so i can just bend some brackets out of alluminum to fit the mounts...problems i see are that it will have to be turned sideways probably and i will probbaly switch the fan to the other side and see if i can reverse the polarity so it pushes in air instead of sucking it out...i hope it is just a matter of extending hoses and making brackets...i want to make it so can switch it back to stock if i ever decide to do some mountain climbing...don't want to always have that radiator open to damage...allthough i will make a cage to protect it eventually...