Starting problem on 2003 700
#21
Originally posted by: Kerbmonster
check ur connection at the battery and make sure that ur kill switch isn't on. if all thats fine, check fuses.
check ur connection at the battery and make sure that ur kill switch isn't on. if all thats fine, check fuses.
#22
Originally posted by: rdlstrv368
Good morning guys. I was reading this thread. I am having a similar problem but I have no digital readout when I turn my key on. New battery Jan. 07, same year, same make. ATV ran fine 3 days ago when I parked it in my garage. Now, nothing. No lights, no winch, no readout. Any ideas?
Good morning guys. I was reading this thread. I am having a similar problem but I have no digital readout when I turn my key on. New battery Jan. 07, same year, same make. ATV ran fine 3 days ago when I parked it in my garage. Now, nothing. No lights, no winch, no readout. Any ideas?
Also did you make sure the inline fuse at the battery is OK?
#24
I don't know of any fuses on your quad, at least I could not find any either. There are 3 thermal breakers up front under the front hood. One is a 20 amp breaker and 2 are 10 amp. They are sealed in a black pod. I went thru my quad, and narrowed my problem to the stator.
#25
Hello--Are 03 700 shutoff on us and when we tried to fire it back up we had pod lights but nothing at starter--A couple inches up one of the small wires that come off the selenoid there is a spliced in fusable link-Seems from swamping the machine so much water got in and corroded the splice(splice is shrink wrapped but must not have been sealed all the way).Spliced wire and link back together and it fired up--Hope this helps
#26
THANK YOU ALL VERY MUCH. I actually found The fusible link this morning and it was the problem! But to the person who mentioned the fusible link, thank you, had I not found it you would have saved me some time and money! And to the person who mentioned the in line fuse, you sent me in the right direction! To all of you, thank you again.
Mick
Mick
#27
Originally posted by: rdlstrv368
THANK YOU ALL VERY MUCH. I actually found The fusible link this morning and it was the problem! But to the person who mentioned the fusible link, thank you, had I not found it you would have saved me some time and money! And to the person who mentioned the in line fuse, you sent me in the right direction! To all of you, thank you again.
Mick
THANK YOU ALL VERY MUCH. I actually found The fusible link this morning and it was the problem! But to the person who mentioned the fusible link, thank you, had I not found it you would have saved me some time and money! And to the person who mentioned the in line fuse, you sent me in the right direction! To all of you, thank you again.
Mick
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)




