TIP:adding a temp sensor
#1
04-21-2007 | 03:02 AM
Thread Starter
|
Trailblazer
Joined: Jan 2007
Posts: 54
Likes: 0
TIP:adding a temp sensor
i found an aluminum "T" on ebay to run inline with your coolant hose and screw in the sensor, pretty slick for $25!
http://cgi.ebay.com/ebaymotors/ws/eB...tchlink:top:us
But for those of us who are cheepos or a little on the adventurous engineering side or just cant wait... i went to home depot and got a brass "T" with some adapters for each end of of the T and another one for the top to fit the fittings that came with the temp sensor. a couple of hose clamps and $15 bucks later i was good to go.
installed in about 1/2 hour and ten dollars richer for gas for the trails!
have fun!
http://cgi.ebay.com/ebaymotors/ws/eB...tchlink:top:us
But for those of us who are cheepos or a little on the adventurous engineering side or just cant wait... i went to home depot and got a brass "T" with some adapters for each end of of the T and another one for the top to fit the fittings that came with the temp sensor. a couple of hose clamps and $15 bucks later i was good to go.
installed in about 1/2 hour and ten dollars richer for gas for the trails!
have fun!
Thread
Thread Starter
Forum
Replies
Last Post
Jeff Roper
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
1
02-01-2022 11:48 AM
jrooker6
Polaris
18
04-23-2016 07:36 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)