Has anybody seen or heard of engine heaters to help heat the oil in a ATV? I was thinking buying and element that was magnatized and sticks right on to the block and then plug it in with an extension. But i can't get one thats to big or it will get to hot and boil the oil. Any other suggestions??

 

[img]i/expressions/face-icon-small-confused.gif[/img]


I have an 01 polaris scrambler 500 which pretty much never starts via electric and never has, which is fine. Now it the pull sart is acting real funny sometimes it is fine but other times you will pull hard and barely an inch of the cord comes out before it stops short resulting in big tiem pain and you never know so you gotta pul hard everytime. I have heard there is a compression screw i have to turn but where the eff is it? my hands hurt somebody letme know what to do!!!

 

Look up an aircraft parts place. They use an item like this that attaches to the oil pan externally.

 

polaris makes one for the 500 that goes in the coolant line between the block and the radiator. I think they make one for the singles and the twins. Look on the polaris web page or call a dealer. I know we put them in some where I used to work.