350L only starts and runs with choke on, and hot light on all the time
#1
350l only starts with choke pulled and that is the only way that it runs????? Any suggestions? Also the hot light is always on even with the colant full?????
#2
Well, I'd say that maybe your pilot jet is clogged. I'm not a Polaris expert but generally speaking, that is a symptom of clogged jets....usually pilot as it is really small and clogs easily.........had the same issue with my 330 trailboss.
#3
hi everyone i am new to this but i figured this would be the best shot i have now i have many atvs and had many but they never were as confusing as this so someone please help
i bought this atv not running i was told it needed a crank seal but i looked farther into the atv it has a nice blue spark and it is gaped to the spec, it is getting plenty of fuel and i even cleaned the carb 2 to make sure it wasnt plugged up still wont start, so i finely changed the crank seal and still just wont fire i even took out the plug and cranked the motor with a peice of paper near cylinder head (purpose was to wet paper with fuel and see if it lites) it ignites so fuel wasnt the issue so i checked the last thing the piston which it is brand new rings are good and has 120 compression SOMEONE PLEASE HELP THANKS
i bought this atv not running i was told it needed a crank seal but i looked farther into the atv it has a nice blue spark and it is gaped to the spec, it is getting plenty of fuel and i even cleaned the carb 2 to make sure it wasnt plugged up still wont start, so i finely changed the crank seal and still just wont fire i even took out the plug and cranked the motor with a peice of paper near cylinder head (purpose was to wet paper with fuel and see if it lites) it ignites so fuel wasnt the issue so i checked the last thing the piston which it is brand new rings are good and has 120 compression SOMEONE PLEASE HELP THANKS
Thread
Thread Starter
Forum
Replies
Last Post
whitty
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
67
Feb 24, 2021 02:52 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



Twice in the normal threads and once in the expert section! Only one post is necessary in either section! 
