i purchased a cdi box for my atv recently my problem is there is an extra wire (green) what do i do with this green wire (i have grounded it to chasis) but atv will not start??
help is apreciated thanks
not sure if i provided enough info but i can if asked

 

I have no idea, since I haven't done this to mine, but if you could post a picture someone else can probably tell you.

 

May want to mention what brand it is too. [img]i/expressions/face-icon-small-wink.gif[/img]

 

here is a picture of what i have NOTE THE GREN WIRE my priginal does not have this all other wires match up
tried to upload picture can someone tell me how to do it???

http://cgi.ebay.com/ebaymotors...rdZ1QQsspagenameZWDVW


copy and patse that

 

The pictures have to hosted by a site like Photobucket or Flickr.

Once you have them there, right click on the photo, and click on properties. The hilight the complete web address given, and copy it.

Come back to this site, and in the reply section, you'll see the image that looks like a frame picture in the tool bar above your typed response. Click on that, the past the address you copied. Hit ok, and it should add the picture.

 

From the pic in the ebay ad.

 

Ok, the instructions I gave for that is if you have a picture you want to post.

For pictures on websites, like the ebay ad, it's just right click, properties, hilight, copy and paste.

 

thanks here it is can someone help me out

http://i263.photobucket.com/al...139/biff009/cdibox.jpg

 

does it go to teh coil?

 

here's the instructions i received

red--charge coil
green--charge coil
white/blue--ignition coil
brown--ground
white--ground
black/red--power coil
black--killer

then i emailed the guy stating my machine does not have a green wire and he told me to ground it to chasis

any other suggestions??
PLEASE