can you stifen your suspention to to get more clearece on a 800 if so how much do you get

 

You can put spring rubbers in between the coil springs......Most use this for plowing though with the extra weight of the plow and bracket mounted to the front of the Quad.....As for the rear you should have a adjustment on the rear .....turn the plate that puts more of less pressure on the coil spring!!..........As for just the front others may give you more ideas!!.......Caper......

 

thanks caper

 

i snow plow with my scrambler and i have teh spring rubbers and on the scrambler they berily do anything i sping them all of the way to the top and i see them hilping a lil bit when i am off the quad and rais and lower teh plow but when im on it i don't feel a diff at all maby the sportsman springs are coiled closer together and they spred the coils out a lil.

 

Have found those rubber spacers that go between the springs to be useless. Have a set in a box somewhere that I tried & packed away. Some have gone with heavy duty springs from the ranger. Also there are spring spacers that go under the springs, some adjustable, That increase the preload.

 

your going to have to ad spacers or a lift to get more clearance.

 

HIO,I STARTED RAISING THE SCRAM WHEN I WAS CHECKING FRONT BEARING PRELOAD+ I NOTICED SOME PLAY IN ONE FRONT SPRING,NOTICED THE BOTTOM SPRING SHIMS MISSING,ME BEING A OVERENGINEERER DECIDED TO ADDING XTRA SHIMS,TWO IS STOCK SO ADDED 5.IT RAISED THE FRONT END A ".ALSO NOTICABLE STIFFER.SO I KEPT GOING +SCREWED UP THE REAR MONO ALL THE WAY + IT WENT UP+ BECAME STIFFER BUT NOT TONS,FOUND A HUGE ENCASED BEARING LYING AROUND PUT IT ON TOP OF THE SPRING.BROUGHT IT TO THE TOP OF THE TRAVEL,WHEN YOU SIT ON IT THE REAR DROPS DOWN 2" NOT THE USUAL 6

 

i dont want to get more lift i just dont want it to sag so much. after a whel of rideing they will start to sag

 

<div class="FTQUOTE"><begin quote>Originally posted by: Spman 800

i dont want to get more lift i just dont want it to sag so much. after a whel of rideing they will start to sag</end quote></div>

I just removed the Polaris HD front springs off my 500, they will fit your 800!
$40