What am I missing?
#21
What am I missing?
No...Reverse override has no effect I even disconnected it to see if that helps. As soon as it gets warm the missing/backfiring/surging starts. Let it set for about 30 minutes and it will run fine until it gets warm again and then it acts up. The only part left I can think of that would be heat sensitive would be the trigger coil stator assembly. Any thoughts?????
#29
What am I missing?
Mine was not running well (weak spark) and would only start with pull starter not electric start and back fire once in a while.
I took off the cover and to my horror I find out the cover protects the $300 stator, pluse coil and pendix drive! It turned out that my pluse coil nexts to the fly wheel was rusty and had metal filings stuck to it, so I took it off and sanded the rust and filings off the pulse coils and the rust off the flywheel bump that actavates the pluse coil,now it runs like new.
I took off the cover and to my horror I find out the cover protects the $300 stator, pluse coil and pendix drive! It turned out that my pluse coil nexts to the fly wheel was rusty and had metal filings stuck to it, so I took it off and sanded the rust and filings off the pulse coils and the rust off the flywheel bump that actavates the pluse coil,now it runs like new.
#30
What am I missing?
Cass,
As mentioned in earlier posts I have checked the intake boot, I also believe the air box is sealing fine and also as mentioned I have ckecked for all possible exhaust leaks. What other air leaks are you referring to?
TLC,
My old stator and pickup coil were not too pretty either but I did clean them up before buying the new one. I wish it would have been that easy.
Again thanks for all the suggestions.
As mentioned in earlier posts I have checked the intake boot, I also believe the air box is sealing fine and also as mentioned I have ckecked for all possible exhaust leaks. What other air leaks are you referring to?
TLC,
My old stator and pickup coil were not too pretty either but I did clean them up before buying the new one. I wish it would have been that easy.
Again thanks for all the suggestions.