Can anyone tell me how to reset the wrench icon that blinks on the pod? I have changed plugs and oil and now need to reset it, and of course i dont have the owners manual. Thanks Eric

 

Should be several posts on this,look up resetting wrench,should take you step by step. OR place in neutral,key off,hold yellow button approx 8 sec,turn key on WHILE holding button,should show V21(Your are in diagnostic mode) toggle to where you see wrench symbol at bottom and HOUR glass symbol,HOLD button will jump to OFF,let up HOLD down again,wrench will flash,LET up button and HOLD again,will start counting STOP at 50,if pass,keep going will go to about 250 and start again! ONCE at 50 let off button,DO NOTHING until wrench stops flashing and hrs will be set for count down,then turn off! LAST TIME FOR THIS my fingers tired!! GOOD LUCK