Got some nice tires and wheels from rocky mountain, but they rears rub on the cab if heavy load. They are 27x12x12 and are suppose to fit according to rm atv. Any suggestions?? thanks

See these pics which show the rear tires:

 

rub on the cab???

 

yes. the rear tires rub on the plastic fenders. In other words... before it bottoms out, the tire ***** hit the plastic fender. seems like the rears stick out 2" to far beyond the fender well.

 

You are going to need to go to a smaller tire or lift the bike. You might be able to get away with some wheel spacers don't know if that will help thoe!

 

wheel spacers will just move the wheel further out. Right?

My wheels are already too far out causing them to rub the fenders.

 

<div class="FTQUOTE"><begin quote>Originally posted by: craftyboy

wheel spacers will just move the wheel further out. Right?



My wheels are already too far out causing them to rub the fenders.</end quote></div>

True but depending on where they are rubbing this sometimes helps. Sorry as it was worth a shot!

 

The Bighorns do run tall. You could try airing the tires down a little bit and set the rear suspension to a stiffer setting until you can get a lift... think you'll need it.