I have seen fuel lines and petcocks clogged before,not enough flow..

do you know that you have correct size main jet in the carb? the needle is at its correct setting?

im pretty sure it is the correct main jet. as far as needle setting i adjusted the float and seems to be correct as well. ill try some more tomorrow. i really would like to ride a bit. all these rains here in middle Georgia have produced some good mud slicks. thanks again guys for the imput.

I had a buddy who had a modified banshee that had same problem.he had 2 into 1 carb.It ran good till half throttle.He took it to three dealers who changed jets etc...no luck..he took it to shadetree mechanic who figured it out.It was petcock[fuel valve].I would start it up,get it warm then get something to catch gas n open your drain screw on carb,rev it up real good n see if gas still runs out.If not then something is clogged.it's easy n worth a try.