Polaris Discussions about Polaris ATVs.

scrambler 400 2x4, won't turn, manual pull stuck

Thread Tools
 
Search this Thread
 
Old Oct 20, 2009 | 02:52 PM
  #1  
horzman's Avatar
Thread Starter
|
Weekend Warrior
Joined: Oct 2009
Posts: 9
Likes: 0
Default scrambler 400 2x4, won't turn, manual pull stuck

Hello guys, I have a 1997 scrambler 400, it's been sitting for about 8 months, battery was drained, I charged it and tried to crank it, but it will only give me a click, I tried the manual pull, it seems to be stuck. can someone please guide me to get the motor unstuck.

Thank you.
 
Reply
Old Oct 20, 2009 | 03:59 PM
  #2  
drlang's Avatar
Pro Rider
Joined: Mar 2005
Posts: 1,635
Likes: 0
From: Wisconsin
Default

Getting it unstuck is 1 thing, why is it stuck is another.
 
Reply
Old Oct 20, 2009 | 04:48 PM
  #3  
stendori's Avatar
Super Quad Patrol
I'm watching you!
20 Year Member
Joined: Jul 2003
Posts: 14,269
Likes: 8
From: central maine
Default

you need to find out why as mentioned it's stuck? did water get into the engine and rust it ? maybe take the clutch cover off to see if you can turn it over w/ the clutch (front engine) by hand. i would take the spark plug out to make it turn over easier. don't turn it over w/ the key on or it might start and hurt your hand.
 
Reply
Old Oct 21, 2009 | 08:10 AM
  #4  
uncertifiedmechanic's Avatar
Pro Rider
My home made pliers did get the job too.
Joined: Dec 2006
Posts: 397
Likes: 0
From: Nashwauk, MN
Default

As Stendori stated, pull plug and see if you can pull rip cord and manually move the piston, if not, then either the piston/rings are into the cylinder wall, or you filled your crank up with either antifreeze and or Gas
 
Reply
Old Oct 28, 2009 | 08:02 AM
  #5  
horzman's Avatar
Thread Starter
|
Weekend Warrior
Joined: Oct 2009
Posts: 9
Likes: 0
Default

Thank you guys, When I removed the clutch cover, I realized that the motor is actually turning, but it was turning about an inch every time, so I kept doing till I got a full turn, then it started turning normal, however I had a real hard time getting to start, as if I was out of fuel, finally it cranked up… but if I let go of the throttle it will die on me…. Also I noticed that when I turn it on in neutral I am unable to change gear to forward or reverse, but when I turn it off I can do that…. If I turn it on as it’s in forward I can drive it, but as soon as I put it in neutral I am unable to put it in gear again.
Any suggestion?
Thank you.
 
Reply
Old Oct 29, 2009 | 07:48 PM
  #6  
eggenz7's Avatar
Pro Rider
Joined: Jan 2007
Posts: 1,047
Likes: 1
From: Troup, Tx
Default

idle is too high for the gear shifting and it sounds like you either have a dirty carb or an air leak somewhere. i would start with cleaning the carb.
 
Reply
Old Oct 30, 2009 | 05:05 AM
  #7  
stendori's Avatar
Super Quad Patrol
I'm watching you!
20 Year Member
Joined: Jul 2003
Posts: 14,269
Likes: 8
From: central maine
Default

if this has been setting for that lenght of time, then chances are the carb might need to be cleaned.
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
MikeyBoyesq
ATV Racing
1
Nov 27, 2020 02:44 PM
txkevin
Drivetrain, Suspension & Tires
9
Sep 21, 2015 02:02 PM
Fullblast
Polaris
1
May 26, 2015 12:38 AM
swire
Buying an ATV
6
Oct 30, 2000 03:25 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 08:30 PM.