im looking into getting a scrambler and one of the first things i want to do is change out the stock steel stamped rims........is there a quad that will interchange with the scrambler such as the predator without me having to buy special fit rims for this thing from ?

Also I once owned a warrior 350 with web cam, wiseco high compression piston, exhaust & jet kit, will i notice a drop in performace when going to the scrambler, that old warrior wouild haul some serious butt ?

One more question, will these things climb hills very well i weight 250# & dont want a slug or get stalled out ?

thanks in advance

 

Is it a 4wd? If so the front hub bolt pattern is a odd large diameter size. Make sure you stick with stock size tires,my friend when to 25" tires on his and it slowed the machines top end and acceleration.

The only hill that stopped him was steep ones which caused the ATV to flip backwards.

 

Wheels interchange with 75 % of all the Polaris quads. It is same 4x4 or 4x2 on gen3 quads. same as old trail boss, Trailblazer, sport and I am sure many more. Front and rear are different lug size and pattern.

 

If its a 4wd, the larger front hub casing with the locking Hillary inside is the cause of the odd bolt pattern,on 2wds the front and back have the same bolt pattern ,I think.

 

No, 4x4 and 2x4s are the same. I just took the front wheels off my 400 scrambler parts quad and installed them on my friends 250 trailboss 2x4. Front and rear are diffrent. I am sure.

 

Bolt pattern for the front should be 4/156mm and 4/4in on the rear.
I wouldnt change the size much in my opinion either.
This is from Mudthrowers.com wheel chart,