Replacing swing arm bushings
#1
#2
Yes you have to take off the clutchs along with the backplate(behind the clutchs).Then you will be able to unscrew the nut holding the bolt.I bought a bolt that screws in the front clutch, then cut the head off a smaller bolt that fits in the hole.Put the smaller one in the hole then tighten the other bolt,tapping on the bolt with a hammer a couple of times and it should pop out.On the older models that have not had the clutches taking off,it might be harder.Hope this helps.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)