Just disconnect each set of awd wires from the connectors under the front panel. Check ohms resistance between the gray and brown on each coil.Doesn't matter which lead goes to which. Normal range is around 25-30 ohms give or take 15% or so. If resistance is way less than this,strength of the coil could be weak.

 

Okay, thanks. That's a big help! I'll let you know how I make out......in a few days!

 

Right side I'm getting 23.5
Left side I'm not getting any reading.

 

I found a broken wire!!

 

 

Thanks again for your help!

It's all back together and working great!