Piston installation
#1
Piston installation
We took apart the top end to replace the base gasket which turned out to be bad.We went to go put the piston back in the jug and it would not go in.We tried clamps ratcheting ring compressors and finally got the rings in. But now the piston will not knock down into the jug.Any help would be appreciated.
#2
#3
you should be able to compress the rings with your finger tips and the weight of the jug alone should help it slide down. Did you ensure the rings are not hung up on a pin? Did you oil the cylinder before installation?
If you're using any kind of force to get the jug down then something is wrong...
If you're using any kind of force to get the jug down then something is wrong...
#5