Hey, I am working on an 'internal flux capacitor' for my Shee!!!

 

Hey guys I've also gotten into the skid plate making myself, I was actually using about 3 layers of sheet metal, worked pretty well. Sort of flexible but still protective. I did manage to break it off though. I also did some custom spacer and collar rigging. Worked a Warrior rear shock in my LT too. Actually it pretty much bolted right up-pretty soft ride. Its a blessing all this stuff worked!

 

I make alot of things myself. I extended the swingarm on mine (+4''), made a front lowering kit, airbrushed plastic along with graphics, and also put leopard print fur on it. Look at my webpage under "Kevin's ride" and you can check it out. Keep 'er rockin, Kevin

 

grab bar and skid plates + frame gards

 

halfliter is there any way we could see a pic of the shee with the two v maxes in it. Thats a lot of motor.

 

I'll try and get some more pics. I also put some 10 inch front brakes on it and people were interested. The pics I have won't go in my gallery. I need a friends help. I'm better at cutting metal than moving a mouse.

 

i am making diamond platted skid arms and frame skids for mine

 

Diamond plate looks good, but can make horrible skid plates, due to the high traction of it. Anytime the skid touches the ground you will be much moor likely to get hung up and stuck thsn if you had smooth skids. I'd hate to case a quad with diamond plate on the bottom.

 

does bread tie pipe hangers count as being customized????? lol!!!!!!

 

I once rode with a guy who had a 2002 majave with a home made wheelie bar on the back it was kinda cheesy but it worked and he used it every five minutes