The DG is load as Hell, I had to take it off but it ran great with it on,just couldn't sneak through town with that muffler. Not sure about the cobra.

 

Agree, my DG is way too loud. Do they still make the cobra systems?

 

Yes I just seen 1 on Ebay for around 200 bucks

 

I kinda like my glass pack. You could probably get a cheap cherry bomb in the 3.5 inch, 2inch pipe config and use adapters to connect it. Then use the same adapter on the outlet and tailpipe connector. I think it would work very well actually. Just wire it to the frame or make some fancy mounts with a welder.

Just the fact that the pipe goes from 1.5 to 2 inch would create a lowpass filter and if the stuffing isn't too tightly packed, the exhaust may see it as a 3.5 inch pipe. All the stuffing does is stop resonant waves.

 

I bought a muffler on Ebay from a 2005 Yamaha yfz450 n a little mig welding I used my stock flang off my 230s muffler so it slides on and off, it works great n sounds good,not loud at all.If you like I can send you pics through Email of the work I did.because I tried to send them here and had no luck not sure what im doing wrong Theres a yfz450 muffler on Ebay for $39.99 free shipping if you want to go that route.I removed the spark arrestor now it sounds good.
I know im rambling AGAIN!!!! Any help with me posting pics here I could use it.

 

Load em into photobucket.

 

An ltz250 exhaust might be a pretty close fit.

I should check that out sometime.

 

If you can use a mig,you could fit alot of things on it.I got my mig from Harbor freight n it works great.I even welded my patch panels on my 1981 C20 chevy truck thing works pretty good for the price.

 

what did i do now!!

 

Joe, here are your pictures:
ATVConnection.com ATV Enthusiast Community - j_mauld's Album: jel08270 exhaust pictures