85 to 88 Suzuki LT230S Quadsport help.
Put it on your quad n run it,you need to see if all gears work n if it needs a clutch? If you dont see what it needs u may only put rings in it,install it,then find u need to take it back out because tranny is bad.Thats what I would do. But I have been called n Idiot before.
Here's a little write-up that I did. The yamaha holes are not the same size as the suzuki holes, so you will have to find a way to fix that. I used spacers, and put the part numbers on that page.
Quadsport 230 project – adapt Raptor 350 rear shock
Quadsport 230 project – adapt Raptor 350 rear shock
My Maier plastics came in today. The left side of the front is yellowed What a pain to have to return these. I ordered another set, hopefully it will be here by the middle of next week. And hopefully it looks alright. Gonna hold on to this set until the other ones come in, just in case the new ones have a yellowed right side
I've decided to say screw white. I just ordered a set of black fronts. I actually think it will looked decent with white rear plastics and black fronts. If not, I'll have to waste another $200 on some black rears some time down the road.
Anyway, yeah. Just needed to vent.