85 to 88 Suzuki LT230S Quadsport help.
Ok they have both bearings on Ebay.08113-60030.(RH) side.also part #09262-17037.(RH) side.for around $25.00.
Part # 09262-22025 (LH) side.
Do a search on Ebay let me know how you made out.
http://www.ebay.com/itm/Suzuki-NOS-LT230-GT750-1972-77-1985-88-Bearing-08113-60030-S47-/251286002268?pt=Motorcycles_Parts_Accessories&hash=item3a81d01a5c&vxp=mtrAlso try this link I copied and paste it not sure if it will work from Ebay.
Part # 09262-22025 (LH) side.
Do a search on Ebay let me know how you made out.
http://www.ebay.com/itm/Suzuki-NOS-LT230-GT750-1972-77-1985-88-Bearing-08113-60030-S47-/251286002268?pt=Motorcycles_Parts_Accessories&hash=item3a81d01a5c&vxp=mtrAlso try this link I copied and paste it not sure if it will work from Ebay.
other case bearing
OK L-MCRacer the other bearing is ntn-6003c3 it measures 17mm bore in center and 35mm OD.this is what I have found on most of my 230s lefts side cases even on my lt250s.
But know I have one left case from a lt230s and that same bearing has a larger OD bearing this bearing has writing on it Canada 6203.c3. it measures 17mm center bore and 40mm OD but all the other bearings are from Japan.So this case was apart before I got it maybe some one could find the bearing so had the block Machined for this bearing?? Maybe not
So take your bearing out and look real good and see what numbers are on it.
Search on Ebay.
look for-
ntn-6003c3 its 17mm bore 35mm OD
ntn-6203c3 its 17mm bore 40mm bore maybe this left case was early 1985 Suzuki lt 230s.
Let me know how you did.
But know I have one left case from a lt230s and that same bearing has a larger OD bearing this bearing has writing on it Canada 6203.c3. it measures 17mm center bore and 40mm OD but all the other bearings are from Japan.So this case was apart before I got it maybe some one could find the bearing so had the block Machined for this bearing?? Maybe not
So take your bearing out and look real good and see what numbers are on it.
Search on Ebay.
look for-
ntn-6003c3 its 17mm bore 35mm OD
ntn-6203c3 its 17mm bore 40mm bore maybe this left case was early 1985 Suzuki lt 230s.
Let me know how you did.
This is not mine. Just saw it on the local craigslist, and thought you guys would be interested in it.
89 LT250 QuadSport
89 LT250 QuadSport
Sick find man, but that's a long drive for me haha. So I have made a couple purchases in the last couple months. I bought a lt500r rolling chassis and pieces to an engine. I'm still working on my lt230. I'm ordering cable sleeving for the lt230 in the next day or so. I also bought lazerstar headlights and mounting bracket to go with everything. I picked them up powder coated black new for 70 bucks.
I'll install everything eventually haha. I also purchased a tapered bearing carrier for the rear. I sold my dual row bearing carrier to buy the tapered one. It doesn't require a center spacer. This is my last winter to work on this project because I'm not spending any more time on it past this winter. I'm riding this spring and then the quadzilla will be my next project. I should have pics up as I go, but of course things will be slow since the quad is 45 minutes from where I live.
I'll install everything eventually haha. I also purchased a tapered bearing carrier for the rear. I sold my dual row bearing carrier to buy the tapered one. It doesn't require a center spacer. This is my last winter to work on this project because I'm not spending any more time on it past this winter. I'm riding this spring and then the quadzilla will be my next project. I should have pics up as I go, but of course things will be slow since the quad is 45 minutes from where I live.
Progress is being made guys! Finally, right! The swingarm is powdercoated white. Bought new bearings for the rear. Painting the frame this weekend to start putting stuff together! Bought new elka shocks for the front! Works Performance Shock for the rear. 200 for the new elkas and 100 for the rear. Amazing deal. The fronts are 13.5" eye to eye which is perfect for the lt250s a-arms. They are off a 300ex! The rear end will be done this weekend and I'm going to paint the frame this weekend and paint/powdercoat the front a-arms. Then next weekend the rear end will go on the frame and the front end. It will be a roller by next weekend, which makes progress a lot better than before!
Progress is being made guys! Finally, right! The swingarm is powdercoated white. Bought new bearings for the rear. Painting the frame this weekend to start putting stuff together! Bought new elka shocks for the front! Works Performance Shock for the rear. 200 for the new elkas and 100 for the rear. Amazing deal. The fronts are 13.5" eye to eye which is perfect for the lt250s a-arms. They are off a 300ex! The rear end will be done this weekend and I'm going to paint the frame this weekend and paint/powdercoat the front a-arms. Then next weekend the rear end will go on the frame and the front end. It will be a roller by next weekend, which makes progress a lot better than before!