I am going to put these on the rims and then give it a quick coat with the hubs attached, to paint the nuts such as the front was done. I probably would not have done this, but this was one of the things that the clown did (ex partner), and i gotta make them match.

 

since I had a set of rear tires mounted and decent for the 230 I decided to use them. This is how I paint rims with tires mounted to them. These were cleaned in the parts washer and scrubbed good, I painted the same white primer and finished aluminum.

 

here is the after product.

 

 

Randy, I figured I would include this just for your mathematical head. These are a 230 rear hub and a moto4 rear hub. coincidetly the small hub pattern on the moto4 one fits the other pattern on all of my ITP rims. Also the splines on these axles is identical. I have put some weight pics here for you.

 

 

here is the actual weights for your figures. The 230 hub is 1.4 ounces heavier. the 230 is 1 puond 13.8 ounces, and the moto4 is 1 pound 12.4 ounces.

 

sorry for all the post in a row tonight guys. I gotta nother for yea on rear weight Randy. Here is a set of yamaha offset aluminum rims that fit the moto4 hub, which fits the 230s axle. these rims are offset only an inch. one side is five and the other is four. these fit those dunlops i pictured (which the dude got some new crappy ones and backed out). These rims only weigh 4 lbs 4.8 ounces. and with the hub thats only 6 lbs 1.2 ounces without tire/per side.

 

thes rims say yamaha on the inside and 5LP. then 5x8.5AT.the other side on the inside also says 1 .05