85 to 88 Suzuki LT230S Quadsport help.
#7791
Randy was saying that 250 cams are bit more agressive, and for the money it was an easy upgrade, rather than buy a couple hundred dollar aftermarket one. I only ask because ebay has one from I think an 87, and then one from a 92. Just wondering if they were different at all.
#7792
There's two, but this one being the cheapest.
92 Suzuki Quadrunner LT250 LT 250 Cam Shaft:eBay Motors (item 190320452856 end time Aug-08-09 09:28:08 PDT)
92 Suzuki Quadrunner LT250 LT 250 Cam Shaft:eBay Motors (item 190320452856 end time Aug-08-09 09:28:08 PDT)
#7794
Grr.. Well I got the new carb. I made sure when I ordered it I cross chacked the spigot and other dimensions with the stock one, and it matches. Just put the throttle cable on and went to hook it up, and the damn intake side of the carb is smaller in diamter than the stock 230 one! The airbox hose will fit, but I can't bolt it to the head???? Ideas?
#7795
Grr.. Well I got the new carb. I made sure when I ordered it I cross chacked the spigot and other dimensions with the stock one, and it matches. Just put the throttle cable on and went to hook it up, and the damn intake side of the carb is smaller in diamter than the stock 230 one! The airbox hose will fit, but I can't bolt it to the head???? Ideas?
#7796
Grr.. Well I got the new carb. I made sure when I ordered it I cross chacked the spigot and other dimensions with the stock one, and it matches. Just put the throttle cable on and went to hook it up, and the damn intake side of the carb is smaller in diamter than the stock 230 one! The airbox hose will fit, but I can't bolt it to the head???? Ideas?
for your cam, your best bet is the LT250S cam, since other aftermarket ones require fancy valve springs and hardfaced rockers. you can still get the 250s cam new from suzuki. you can try ebay, but there really arent a whole lot of lt250's out there, since they were only produced for 2 years.
hth
#7797
#7798
None of the old ones had flat slides, all round. BigMc the originator of the thread, got us hooked on them. Takes some tuning, I suck at it BTW, but once it is dialed, it is far and above better than the 30 , or whatever it is, round slide!
#7800
Jetting them to each of our 230's was quite an adventure.... If you go back far enough, there are jetting specs for many situations. Randal defenatily did a TON of research...