09 king quad, no pull start
#1
09 king quad, no pull start
There is no pull start setup on the my new 09 750KQ, My Dealer has no info why Suzuki stoped putting them on? Does anyone here know why. Wish I had noticed that before I bought. Does anyone know if a pull start setup can be bolted up, is there an aftermarket for that or could that be something I could get from Suzuki
#3
#4
Yes and the fact that most any "Big bore" does not have them anyone any way. If you think it is going to be a issue for you I would suggest a investment in a battery tender to keep you battery healthy!
#5
Buck
#6
more worried about being on a week long hunt in the middle of no where. I guess a small set of jumper cables are in order
#7
Trending Topics
#8
A buddy sprained his wrist pull starting his Rincon... a 680. I don't even want to try pull starting a 750 or bigger. I was told that EFI doesn't work without battery power, so it's pointless on newer quads. There may be a nugget of truth to this. I know the fuel pump cycles on the 850 when you turn the key to the 'on' position before you start it. If the fuel system didn't get primed, the quad wouldn't start.
#9
A buddy sprained his wrist pull starting his Rincon... a 680. I don't even want to try pull starting a 750 or bigger. I was told that EFI doesn't work without battery power, so it's pointless on newer quads. There may be a nugget of truth to this. I know the fuel pump cycles on the 850 when you turn the key to the 'on' position before you start it. If the fuel system didn't get primed, the quad wouldn't start.