AC Pro Pegs Blow
#42
I would love to get a replacement if they are going to work. I wish you could have seen the misalignment of the heel plates, but as I stated before I cut them out. I was wondering why you don't weld the tubes together that are visible through the peg teeth? I must say that the pegs are nice and extremely sharp which should prevent slipping off. The new design peg is a good improvement. Also, today I sat on it and noticed that the net brace on the left side restricts the foot from being able to dip down to get your foot under the lever. Maybe my statement about your nerfs blowing was a little harsh, but I have been satisfied with your other products and was pretty disappointed with having soo many problems. I wanted to know if other people were having the same problems. I may have already burned my bridge, but I would be happy to help you figure out any problems as to help you get over this.
#43
no you havent burned a bridge yet. this why i came here to help put out fires. i know what happened to here nerfs. after lookng at yours and comparing it to my patterns there is a little differance. as for the missed weld. thats a unexcuseable thing. either come by and see me or call me i would like your input as a racer.
#48