Know of anyone who wants a lt500?
#1
Hey guys,
I'm selling a '87 'zilla that had been built up from practically a basket case. The guy before me had crashed pretty hard and had bent the front part of the frame. He replaced the parts that were messed up, and I had it straightened out and then built everything back up. It has a Trinity Racing Stage III port job, FMF pipe and silencer, white Maier plastic, Cascade seat, full set Shockwears, polished swingarm and stator cover, 2.5mm over Wisco piston, new swingarm/a-arm bearings, water pump impeller & seal, new gaskets, and a K&N filter w/Outwear. I also have a full set of sand tires with 10 paddle haulers. It needs a little work, meaning the main bearings are starting to go out, which would cost $250 to do from Trinity. I'm asking 3200, but that's negotiable. So if you know of a friend or someone who wants one of these powerful bikes, send them to me. [img]i/expressions/face-icon-small-smile.gif[/img]
I'm selling a '87 'zilla that had been built up from practically a basket case. The guy before me had crashed pretty hard and had bent the front part of the frame. He replaced the parts that were messed up, and I had it straightened out and then built everything back up. It has a Trinity Racing Stage III port job, FMF pipe and silencer, white Maier plastic, Cascade seat, full set Shockwears, polished swingarm and stator cover, 2.5mm over Wisco piston, new swingarm/a-arm bearings, water pump impeller & seal, new gaskets, and a K&N filter w/Outwear. I also have a full set of sand tires with 10 paddle haulers. It needs a little work, meaning the main bearings are starting to go out, which would cost $250 to do from Trinity. I'm asking 3200, but that's negotiable. So if you know of a friend or someone who wants one of these powerful bikes, send them to me. [img]i/expressions/face-icon-small-smile.gif[/img]
#2
i know this dude that will trade his hooked up banshee for it and if u want to read about it go here and go to forsale trade sections quad racer forums
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)




