230 quadsport motor question
#5
You have to take the top of the head off where the camshaft lives pull cam out but keep the cam chain
up!!then you can remove the head it should come right off and out the side.Then you can push the piston to the bottom of the cylnder pull up on cilinder and keep pushing pison down.Should pop right off and come out the side of the bike.
all of these pieces are separet and should come apart individually.I recomand getting a manual for this job if you dont allready have one because if you put it back togeather wrong the piston will hit the valves and the you get to start all over again with some new parts.
!!!!!!!!!!!!I know Ive done it!!!!!!!!!!!
hope this helps at least a little.
up!!then you can remove the head it should come right off and out the side.Then you can push the piston to the bottom of the cylnder pull up on cilinder and keep pushing pison down.Should pop right off and come out the side of the bike.
all of these pieces are separet and should come apart individually.I recomand getting a manual for this job if you dont allready have one because if you put it back togeather wrong the piston will hit the valves and the you get to start all over again with some new parts.
!!!!!!!!!!!!I know Ive done it!!!!!!!!!!!
hope this helps at least a little.
#6
Thread
Thread Starter
Forum
Replies
Last Post
TLC
Honda
7
07-11-2015 02:28 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)