Z400 Lid or no lid?
#1
Z400 W/bjetted with K&N Lid or no lid?
Hi guys,
Need some advise here. I have just fitted a W/Bros. E series pipe to my Z400 and rejetted the carb with the Dyno jet kit using the needle at position three, main jet 150 and idle mixture at 3 1/2 out as per the instructions. Also fitted a K&N with Outerwear using a pro flow adapter. The bike idles well and pulls great with the air box lid off. I am using the bike on sand (nothing else out here - Dubai UAE) and was wondering if any of you dune riders out there are running with the air box lid off using a similar setup.
Any feed back would be appreciated.
Many thanks,
Dave M
Need some advise here. I have just fitted a W/Bros. E series pipe to my Z400 and rejetted the carb with the Dyno jet kit using the needle at position three, main jet 150 and idle mixture at 3 1/2 out as per the instructions. Also fitted a K&N with Outerwear using a pro flow adapter. The bike idles well and pulls great with the air box lid off. I am using the bike on sand (nothing else out here - Dubai UAE) and was wondering if any of you dune riders out there are running with the air box lid off using a similar setup.
Any feed back would be appreciated.
Many thanks,
Dave M
#4
Z400 Lid or no lid?
The lid of the airbox is to keep water out more the anything. The K&N and outerwear should do it's job and keep the sand out of your motor. Even with the lid on if you are riding in sand it can be pulled in through the snorkle. Thats the beauty(horor) of sand.....it gets everywhere. Keep that filter clean and appreciate that you get to ride in the sand.....The rest of us have to travel to ride the soft stuff!!
#5
Z400 Lid or no lid?
Keep the lid off and remove the snorkle (everything) let that baby breath ...
I ride all kinds of sand: fine powder Logandale , grity (salt size) Armagosa , grity (suger size) Dumont , and very very fine
dusty sooty crap (VEGAS)[img]i/expressions/face-icon-small-happy.gif[/img]
I ride all kinds of sand: fine powder Logandale , grity (salt size) Armagosa , grity (suger size) Dumont , and very very fine
dusty sooty crap (VEGAS)[img]i/expressions/face-icon-small-happy.gif[/img]
#6
Z400 Lid or no lid?
Hey Guys,
Thanks for the input. Appreciate it. Rode again today, just getting used to the added power or is it the added noise? No really the power is definately better. Just wondering about the main jet though. It feels a bit lacking at the top end. Short of doing a plug pull after a full throttle drag, any ideas on my set up? A bit lean maybe with a 150?
Thanks again guys.
DaveM
Thanks for the input. Appreciate it. Rode again today, just getting used to the added power or is it the added noise? No really the power is definately better. Just wondering about the main jet though. It feels a bit lacking at the top end. Short of doing a plug pull after a full throttle drag, any ideas on my set up? A bit lean maybe with a 150?
Thanks again guys.
DaveM
#7