Grizzly 660 problem Please Help!
#21
#23
Check the reverse lever
There is a reverse rev limiter located on the little arm that makes contact with the clutch lever. When you put it in reverse you push the button which makes contact with the lever. If the lever does not return to its stop it will not let the motor rev. Reach under the clutch lever and find it and push it back to its stop. If the reverse cable sticks it will cause the problem. My raptor has the same set up and the same problem...good luck.
Thread
Thread Starter
Forum
Replies
Last Post
RedRancher
Yamaha
15
10-15-2020 01:45 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)