Help needed
Apr 10, 2013 | 09:10 PM
#1
Thread Starter
|
Weekend Warrior
Joined: Apr 2013
Posts: 1
Likes: 0
Help needed
I have a 2002 Arctic Cat 400. The ATV has NO electrical power even when the the key and on and off switch is on, but when the ATV is started by pull starting it all the electric stuff works. What is the problem?
Thank you
Thank you
Apr 23, 2013 | 10:36 AM
#2
Weekend Warrior
Joined: Apr 2013
Posts: 8
Likes: 0
here's a link to the wiring diagram 2002 Arctic Cat 400-500 FIS WIRING HARNESS ASSEMBLY | CyclePartsNation Arctic Cat Parts 1st
May 28, 2013 | 12:25 AM
#3
Weekend Warrior
Joined: May 2013
Posts: 14
Likes: 0
From: Dunnellon fl
Probably a bad positive contact between the key switch and the battery try jumping the selonoid if it starts then start at the battery with a test light and work your way towards the key switch if you have power all the way then you may have a bad switch
Nov 12, 2013 | 12:59 PM
#4
Pro Rider
Is old enough to know better, but too young to stop.
Is old enough to know better, but too young to stop.
Joined: Dec 2002
Posts: 2,681
Likes: 0
From: Northern Virginia, near DC
The old Honda Warriors used to be notorious for bad grounds. Especially if it saw a lot of mud riding. The emergency kill switch was a problem area too.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
