I've been lookig at bolt on storage devices and ran across Montana Jacks receiver hitch systems. Just wondering if any one has ran or is running any of their stuff?
[img]i/expressions/beer.gif[/img]

 

I have the receiver hitch system and it works good, I have the gas pack which I had to modify to take the bigger gas can.
Also have the winch rotator for plowing and it takes stress off the wire rope.

 

My receiver mount is due to arrive tomorrow. I'm looking quite forward to getting it and starting the install.

 

I loved the idea, but not the price. I couldn't afford to get everything I needed, so I ended up buildig my own. It's the same idea as putting a hitch on your truck, but at a different scale. The fine tuning can eat-up a lot of time though I found out, but it was a fun project. Its the time, research, and equipment that you are buying from Montana Jack's; not the materials. A side benefit, is that it makes your quad stronger too.

 

Well I guess you guys have a little more coin to spend than me......If you're looking for a 2 in. rear receiver it's not that hard to build one yourself.....I built this one myself modeled from the one from MJ's....Plus mine is 2in. and MJ's is only for 1 1/4 if I recall.....I kept mine as high as possible without having to remove my rear bumper....Check out my pics if you want here.

<a target=_blank class=ftalternatingbarlinklarge href="http://www.pbase.com/rottweiler/jcdeyo25
">http://www.pbase.com/rottweiler/jcdeyo25
</a>

John

 

I've installed my multi-mount and am really happy with it. It was a good time to replace some broken rack mounting bolts also. There was one problem I encountered with the rear half of the mount: my winch will not install properly with my HMF exhaust. You can flip it upside down and use it but this is, of course, not the ideal solution. I'm going to fabricate an extension to use to clear the exhaust. Other than that, it seems to be a great set-up.