what the h**L is breaking in???????/
#11
11-06-2003, 04:48 PM
what the h**L is breaking in???????/
I knew some would disagree but I can tell you I have a Yamaha SXViper, 2 Ski-doo Revs, and My Banshee that I did this breakin method and never had a problem to this day. I ride with a couple of people who had Polaris/Artic Cat and they were following the manufacture breakin and one blew a motor 450 mile in to it and the other 1200 miles into it. I didn't say you had to believe it but he has pictures on the page yeah they might be fake but I doubt it. To each his own.
#12
11-06-2003, 06:16 PM
Pro Rider
Join Date: May 2003
Location: Hiawassee, GA
Posts: 667
Likes: 0
Received 0 Likes
on
0 Posts
what the h**L is breaking in???????/
Originally posted by: daniel
BREAKING IN AN ENGINE 101.
Step 1. Stop and buy a 12 pack on the way home from the dealer
Step 2 Drink a beer before unloading your new ATV
Step 3 Unstrap ATV Look for ramps
Step 4 Drink beer
Step 5 Can't find ramps, look for good place in ditch to unload
Step 6 Drink beer
Step 7 Back into ditch and bury reciever hitch into mud.
Step 8 Drink beer
Step 9 Spin out real bad, throwing mud, gravel and grass onto wife who was directing you into ditch
Step 10 Drink another beer
Step 11 Ask neighbor, who just showed up cause of all the noise, if you can use his ditch.
Step 12 Drink beer, give one to neighbor
Step 13 Back into neighbors ditch and proceed to unload ATV
Step 14 Drink beer
Step 15 Look for owners manual.
Step 16 Can't find manual so just gonna wing it.
Step 17 Pick up pushmower and pour gas out of it into coffee can because dealer put two
Tablespoons of gas only into ATV.
Step 18 Fire that baby up while drinking another beer
Step 19 Get on ATV and pull out into street. Listen to neighbor say something about how you should
have bought the bigger bike because these are slow.
Step 20 Pin it wide open because of all the beer and crap from your neighbor.
congratulations you have just broken in your new ATV.
hahahahaha [img]i/expressions/face-icon-small-smile.gif[/img]
BREAKING IN AN ENGINE 101.
Step 1. Stop and buy a 12 pack on the way home from the dealer
Step 2 Drink a beer before unloading your new ATV
Step 3 Unstrap ATV Look for ramps
Step 4 Drink beer
Step 5 Can't find ramps, look for good place in ditch to unload
Step 6 Drink beer
Step 7 Back into ditch and bury reciever hitch into mud.
Step 8 Drink beer
Step 9 Spin out real bad, throwing mud, gravel and grass onto wife who was directing you into ditch
Step 10 Drink another beer
Step 11 Ask neighbor, who just showed up cause of all the noise, if you can use his ditch.
Step 12 Drink beer, give one to neighbor
Step 13 Back into neighbors ditch and proceed to unload ATV
Step 14 Drink beer
Step 15 Look for owners manual.
Step 16 Can't find manual so just gonna wing it.
Step 17 Pick up pushmower and pour gas out of it into coffee can because dealer put two
Tablespoons of gas only into ATV.
Step 18 Fire that baby up while drinking another beer
Step 19 Get on ATV and pull out into street. Listen to neighbor say something about how you should
have bought the bigger bike because these are slow.
Step 20 Pin it wide open because of all the beer and crap from your neighbor.
congratulations you have just broken in your new ATV.
hahahahaha [img]i/expressions/face-icon-small-smile.gif[/img]
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)