Sorry about that [img]i/expressions/face-icon-small-blush.gif[/img] Kinda missed the link to get you to the right page you wanted. I wouldve gave you the front page if you had a V-Force, but ya know [img]i/expressions/face-icon-small-wink.gif[/img] lol just kidding just kidding!!

I always find reliability in the 686's or stock bores. I dont read too many problems about them, when you have an all out drag bike of some sort, then your gonna find some problems. But with the mods your going to be doing you should be just fine. Header, Stage 2, valve springs, and (maybe) carbs sounds good to be, im grinning already, cause I know your gonna love it once its all on [img]i/expressions/face-icon-small-happy.gif[/img]

 

Im lovin the bike already so it can only get better[img]i/expressions/face-icon-small-happy.gif[/img]

 

I don't think you have anything to worry about with the new cam in valve springs. Just make sure you have someone that know's what they are doing with installing the new valve springs. The new valve springs are a reliability deal. They are pretty much required with the stage 2 cam, but you will be happy. The header will increase flow, and the stage 2 will move your power. You will be very happy...don't forget to check your jetting with the new mod's. You will probaly need to increase your jetting size with the new pipe and cam.

 

sale it & buy LT500 quadracer. hell a wider back axle & 2"+ a-arm's would make raptor fill twice as fast. no kidding??!!..

 

no thanks on the LT500. I dont want the Rappy to FEEL twice as fast but BE twice as fast.

 

thanks again for all the replies guys. once again I came to the right place.

 

carbs,cam

 

i had to try?? at least. i'm a yammie fool too.. the rap' just seem's skinny was the only problem i had with it.

 

I mostly shoot comp hill with it but for the dunes runs, I just throw my body a little more

 

If you can keep your power in the mid range and top end, I definetly think you will feel the difference on the hill. Your top end should pull like hell with the new cam.