2 stroke ? plz post answer :)
#6
#7
Trending Topics
#8
2 stroke ? plz post answer :)
are you talking bout those lil crotch rockets?? my buddy has one. man its mos def not worth the 500 dollars he spent on it. the gas tank is so wide that you hit your wrist on it when u turn. it wasn't even fast. it was automatic and went about 30. what exactly is your prob with 2 strokes?
#9
2 stroke ? plz post answer :)
Pocket bikes area load of fun....we run them when we get a chance. It's hard to find parking lots that the cops don't show up at.
I purchased a cheapy. (Cagllari) off Ebay for $230 shipped to me. Added carbon fibre reeds..opened the exhaust and I get around 35mph out it.
Some say that is not fast...well...get your butt a few inches off the ground and take a turn at 30...you will change your mind in a hurry. Especially when you slide out..lol.
Your going to want to run the mixture at 50:1. And count on working on the bike after just about every ride. They are tempermental to the weather big time. They have fixed jetting for the most part...so you have to change jets instead of playing with mixture screws. Of course you can buy after market heads and carbs.
My buddy has a polini 6.2 pb....it does almost 50 and lifts the front end whenever you like it to.
I purchased a cheapy. (Cagllari) off Ebay for $230 shipped to me. Added carbon fibre reeds..opened the exhaust and I get around 35mph out it.
Some say that is not fast...well...get your butt a few inches off the ground and take a turn at 30...you will change your mind in a hurry. Especially when you slide out..lol.
Your going to want to run the mixture at 50:1. And count on working on the bike after just about every ride. They are tempermental to the weather big time. They have fixed jetting for the most part...so you have to change jets instead of playing with mixture screws. Of course you can buy after market heads and carbs.
My buddy has a polini 6.2 pb....it does almost 50 and lifts the front end whenever you like it to.
#10
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)