Results from Texas Sand Drags last weekend
#24
Results from Texas Sand Drags last weekend
yea its a 4mm stock bore, makes it like 372cc i think, not really tryin to hide the fact that its a 4mil, i jus usually say its a 350 cause its pretty close. the 4mil crank doesnt really add much HP, mostly torque. I called Kim (K&T) to ask about taking the 4mil out and putting a stock crank back in it, but he says its more trouble than its worth.
#25
Results from Texas Sand Drags last weekend
Adam, most people try to gain hp, not loss it.[img]i/expressions/face-icon-small-smile.gif[/img] My brothers first banshee build was the 4mil stroke and stock bore. I was impressed. Now hes running a 7mil with stock bore. Thats his trail bike.[img]i/expressions/face-icon-small-happy.gif[/img] The 10mil big bore shee is being built as we speak.[img]i/expressions/face-icon-small-smile.gif[/img]
#26
#27
#28
Results from Texas Sand Drags last weekend
actually 4mm and 7mm's if done right make a good deal more horsepower. Most people dont run 4mm's and are honest about it, but i know of many stock bore/stroke 350's making 90hp on alk, and one at 95-96 which is the best ive heard of, while i know of ne 7mm at 115hp and one 4mm at 105. So there can be a difference in power when done correctly. Of course hp doesnt mean jack on a strip though
Thread
Thread Starter
Forum
Replies
Last Post
Jeff Roper
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
1
02-01-2022 11:48 AM
Scooter's Shop
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
23
10-22-2015 07:04 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)